Results 1 to 15 of 23
Thread: Suppressor Melt Down M249
-
10 July 2017, 08:17 #1
Suppressor Melt Down M249
In case you haven't seen this.
-
10 July 2017, 08:40 #2
Way to ruin a 249 barrel.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
10 July 2017, 10:53 #3
Don't know if they were just having fun, or trying to prove a point. Melting something hanging off the end of your barrel looks like a good way to block your barrel and blow one up in your face, so fast that'd you'd never know what happened until you woke up in intensive care with a jaw missing. Just saying. But, hey, have fun.
NRA Life Member
Basket full of Deplorables Life Member
-
10 July 2017, 17:53 #4
That was stupid.
-
10 July 2017, 19:04 #5
-
10 July 2017, 20:02 #6
Based on my rough estimates they got about 150 rounds through that can before it was toast for any kind of normal regular use ever again.
-
10 July 2017, 20:11 #7
By time that suppressor melts its about the equivalent of a roll of paper towels on the end of that SAW. I'd get behind that in a heartbeat and blow that can apart just like he did.
-
10 July 2017, 20:36 #8
Idiots.
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
11 July 2017, 13:59 #9
Good hell just breathing in all of that gas makes me cringe.
FFL 07/ NFA 02
TWN Certified Hydro Dipper
-
12 July 2017, 12:46 #10
-
12 July 2017, 13:19 #11
Rich, why do you keep wasting bandwidth on this? If you keep taking up precious bits and bytes with this, the rest of us won't get our internet porn in a timely manner!
Try to be a team player.
-
12 July 2017, 14:41 #12
Dumb
There's no "Team" in F**K YOU!
-
12 July 2017, 15:44 #13
-
13 July 2017, 14:33 #14
-
13 July 2017, 15:01 #15