Results 1 to 7 of 7
Thread: Rainier Avalanche Mod 2
-
23 October 2017, 19:38 #1
Rainier Avalanche Mod 2
This is more of a review. I got one of these during the pre-order phase and waited two months to get it.
I got it, greased it, and tossed it in the rifle. Within a few minutes I knew I was going to return it. It is very light weight (I knew that to begin with), but it’s too thin, especially for an ambidextrous charging handle. This leads to some horrific binding, to the point it binds and holds the bolt to the rear under buffer spring tension. Doing the two finger over the top straight pull is uncomfortable and it just doesn’t feel like a quality instrument. I tried it in 3 uppers, the first being Rainier’s own. No luck. It’s going back first thing tomorrow.
-
25 October 2017, 08:09 #2
-
31 October 2017, 03:20 #3
What I first thought of them...looks cool
But even un suppressed I could tell i wasn’t gonna like it, plus the loose fitting in the upper , especially the latch setup...no thanks... gave it to a buddy that rarely shoots but thought it was the coolest thing ever..
-
31 October 2017, 06:04 #4
I returned it and a SNACH will here Thursday
-
31 October 2017, 09:04 #5
The Avalanche is geared towards the enthusiast, customization crowd.
I haven't used a 2.0 yet, but the original Avalanche was not duty grade.
-
19 January 2019, 08:42 #6
The Avalanche has been relaunched:
We had a lot of production issues with our initial launch. Our manufacturing partner couldn't produce consistency and I ended up eating about $50,000 in product to ensure bad products weren't causing issues for guys down range. The slow launch caused me to miss the marketing window and other competitors filled the void.
We didn't give up and we continued to reach to fulfill our vision. We have finally produced what we wanted to all along, a robust ambidextrous charging handle that allows the user to customize their latches for their desired look and feel.
Even if you miss your target, readjust, work harder and keep driving. This is a 3 year project in the making and I'm thankful our team never gave up.
-
19 January 2019, 09:48 #7
I’d like to try the new 2.0. I’m all about fixing problems and trying again though!