Results 1 to 15 of 29
Thread: G20 10mm....who else has them?
Hybrid View
-
3 April 2018, 14:39 #1
Having had both, and you're not 100% sold that you want a 10mm, I'd consider the Glock. They seem to take the snappy, hard recoil in stride. The Colt, on the other hand, started sliding down hill, albeit it a little at a time, from the first 1000 + rounds. Thus the recommendation for using the shock buffers at the range. (Never use them in a SD pistol, and they can come apart and render your weapon useless, just in case you didn't already know that).
I sent my Delta Elite to Wilson Combat and spent a fortune on it, just to realize it just wasn't practical.
My Glock just kept on ticking and for what I paid for it, I didn't care all that much about wear. It was just really too big for my hands, and I just couldn't find a niche, other than just having fun with it, and it eventually got traded away for something, I don't really recall. The Colt is a safe queen, and has been for a while.
If you have average or larger hands the G20 might just make your day! If you reload, you'll like it even better.
FTNRA Life Member
Basket full of Deplorables Life Member
-
3 April 2018, 15:47 #2
I've got a gen 3 G20 currently and it's definitely my favorite/ most fun to shoot pistol. I wear XXL Mechanix gloves so the grip isn't bad at all. I was looking for the G20SF at the time, but found a deal on this one for $500 after tax. It's just made me kinda want the other two models Glock offers in the caliber. The G29 would be a nice ccw in winter when possible bad guys are wearing thicker clothes and the G40 MOS would be to eventually set up with an RMR and suppressor height sights as a more dedicated hunting rig. I've also considered just getting a Lonewulf long slide and have it milled to swap out with the factory G20 slide for that same purpose instead of the G40 MOS.
I tend to use it as a woods gun when at the camp hiking/mountain biking and hunting. Finished off a few feral hogs with it and was pretty impressed with the Sig elite jhp's performance. I've got some HPR 180gr loaded with Hornady XTP that are supposed to be a little warm at 1260fps I need to shoot some hogs with to see the difference. I've had a set of RCBS carbide dies for 40sw/10mm forever it seems that I plan to eventually handload for it with, just need more space to setup for reloading.
Thanks for all the information and pointers!!Last edited by JMJ; 4 April 2018 at 03:55.
-
3 April 2018, 18:07 #3
-
4 April 2018, 07:42 #4
Yeah I'm pretty well set with it, other than putting some better sights on it than the factory ones.
I think like most things in the firearms/shooting hobby I'm a victim of myself seeing something new and wanting it. I could easily get the G40's velocity/kE improvements by just getting a 6" drop in barrel for my G20 and calling it good.
I could see your decision to get rid of your G20 as being very rational if you don't hunt or need a back country protection piece for large animals.
I also have found it fun for distance shooting since it's such a flat shooting round compared to .40SW. I'll admit to not having much experience shooting 9mm pistols, so I'm not sure how the 9mm's trajectory at distances past 60m.
-
20 May 2018, 08:34 #5
Regarding protection against bears and big cats, although I know a .40 will kill a big ass male lion, and the 10 mm would do it several steps farther away, I will have shat my drawers regardless of the stopping distance of said predator from reaching me and converting my wonderful sense of humor into bear shit (Big cat shit, etc..). When a big cat notices you, it stops, looks you over, makes some calculations and then heads your direction, speeding up as it gets closer. Kind of unsettling! :D
I want one of these because "Fuck you; that's why!"
There's no "Team" in F**K YOU!