Results 1 to 15 of 15
Thread: AK build from KM3 Solutions!
-
4 July 2019, 07:42 #1
AK build from KM3 Solutions!
I know many of you here aren't into AKs, but that's okay, I forgive you.
Well it's here! Took me a few days to get time to take some pics. I can't say how excited I am get get this back and just check it out. Beyond happy with everything.
Tons of work went into this and you can tell when you're holding it.
I need to get a lighter toned 40 round bakelite mag to pair with it.
Everyone at the gun shop was geeked to check it out. They couldn't believe I hadn't even see it yet and they they'd all seen it before me. The whole place gathered 'round to watch the unboxing. Haha.
I am swamped with my day job at the moment but I cannot wait to get to the range!
Jmac supplied all their parts for this build which is what started it all.
Circle 10 AK supplied the parts kit.
CMC, the trigger.
Sabrewerks, the mounting system and sight.
RS Regulate, their handguard.
Khyber Customs, their cheesgrater and grip.
7six2 by Damage Photos, on Flickr
FDS_8546 by Damage Photos, on Flickr
FDS_8539 by Damage Photos, on Flickr
FDS_8536 by Damage Photos, on Flickr
FDS_8535 by Damage Photos, on Flickr
FDS_8540 by Damage Photos, on Flickr
FDS_8541 by Damage Photos, on Flickr
FDS_8542 by Damage Photos, on Flickr
FDS_8537 by Damage Photos, on Flickr
FDS_8547 by Damage Photos, on Flickr
FDS_8538 by Damage Photos, on Flickr
From "tip to tail" here are some details from KM3:
Jmac RRD4c Keymo
Jmac 14.5" Barrel
Jmac Gas Block
Romy G Kit
Childers Receiver - engraved and all Cerakoted OD/Bazooka green
RS Regulate rail - machine turned flats, ghosted Elite Cerakote and Burnt Bronze
VEPR heat shield - Cerakote gold mix
Gas Tube - Cerakote bazooka green
MAK90 top handguard with Khyber customs Swiss grater inset, cerakote burnt bronze, wood refinished and cerakote cleared
Bolt carrier - engraved and cerakoted custom gold mix
Bolt - polished, deburred, cerakote Elite Smoke
Sabrewerks sight system with SHIELD sight.
JMac Stock Adapter Cerakote Burnt bronze
Khyber customs VERA grip - bottom custom cut, stippled, refinished, Cerakote cleared
Romy G dong, cut and modifed into MLok shark fin, refinished and Cerakote cleared
Jmac Prototype stock, machine turned and ghosted in cerakote elite/burnt bronze, drilled and tapped for riser
Cheek riser - top of MAK-90 stock, fitted and refinished, Cerakote clear
CMC trigger, coated in custom gold Cerakote mix
Krebs safety leverGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
4 July 2019, 08:06 #2
This thing is beautiful. And you got some badass photos of it.
-
4 July 2019, 08:34 #3
That looks absolutely awesome!
-
4 July 2019, 08:38 #4
Your logo on it was a nice touch too.
-
4 July 2019, 08:40 #5
Pretty freakin cool man!
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
4 July 2019, 15:41 #6
Thanks!
Uwone, yeah I really like how he Incorporated the AK bolt face rather than just my logo.
Sent from my SM-G930V using TapatalkGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
4 July 2019, 17:02 #7
Darn nice AK! I'm not much of a fan, but this one has me impressed. Great job to both you and Kris for avoiding the same ole look. Very cool.
There's no "Team" in F**K YOU!
-
5 July 2019, 05:53 #8
I love that so much, especially the Space force part haha.
FFL 07/ NFA 02
TWN Certified Hydro Dipper
-
5 July 2019, 06:12 #9
Genuine 100% mewantum right there!
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
5 July 2019, 09:52 #10
Very Nice !
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
6 July 2019, 03:32 #11
Nice rifle damage!
Nice job km3!!
-
16 July 2019, 23:36 #12Contributing Member
- Join Date
- Feb 2009
- Location
- Central PA
- Posts
- 360
- Downloads
- 0
- Uploads
- 0
Thanks everybody!
This build is def my current favorite and the most intensive I've done as far as delving into each and every realm of what I do - AK building to woodworking to finishing and engraving techniques. Was a blast to build and I'm loving the response it's getting everywhere.
-
17 July 2019, 08:12 #13
I have that majestic beauty haunting me all over IG and now here ? I get it , I'm a poor and my AK that I loved is now tossed aside like trash to lust after yours
-
17 July 2019, 10:00 #14
Tagged my buddy over on the gram he was flabbergasted very awesome. Would you say the CMC flat trigger is your favorite of aftermarket AK triggers?
-
17 July 2019, 11:52 #15Contributing Member
- Join Date
- Feb 2009
- Location
- Central PA
- Posts
- 360
- Downloads
- 0
- Uploads
- 0