Results 151 to 165 of 194
Thread: Centurion Arms Photo Gallery
-
9 March 2020, 15:29 #151
The Mod 1 is a little lighter and I'd argue more configurable without buying more parts. But of course, it's not "as" iconic. I'm not sure what Monty is doing with his barrels now (I think the MK12 and RECCE barrels may still be Douglas, but that may be in error), but my understanding was that at the time I bought mine, his MK12 was a Douglas as well. Perhaps that was incorrect. Either way, it's to spec, it's super-accurate, and the gas is just about nil (I had to go there!).
-
9 March 2020, 16:06 #152
-
28 August 2020, 13:29 #153
C4 MLok Mid Cut
Sent from my SM-G975U using Tapatalk"And now you understand. Anything goes wrong, anything at all... your fault, my fault, nobody's fault... it won't matter - I'm gonna blow your head off. No matter what else happens, no matter who gets killed I'm gonna blow your head off." -Big Jake
"All the Gods, all the heavens, all the hells, are within you." -Joseph Campbell
Instagram- @tomcheaney9
-
29 August 2020, 10:49 #154
Good looking setup Tom. Reminds me of my 14.5" with the Cutout, but mine is an old school C4 Pic rail.
-
29 August 2020, 11:16 #155"And now you understand. Anything goes wrong, anything at all... your fault, my fault, nobody's fault... it won't matter - I'm gonna blow your head off. No matter what else happens, no matter who gets killed I'm gonna blow your head off." -Big Jake
"All the Gods, all the heavens, all the hells, are within you." -Joseph Campbell
Instagram- @tomcheaney9
-
27 December 2020, 20:11 #156
-
10 February 2021, 20:37 #157
Bolted up rock solid and I like the new blacked out logos.
The cuts and tolerances around the FSP are fantastic
-
10 February 2021, 21:19 #158
Very nice 11B. I swapped my carbine quad cut-out for the m-lok versilon. I like it on my shorty 5.56, but the quad is so much classier. It will be back on another build someday.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
11 February 2021, 08:34 #159
So what are your thoughts on the holosun?
-
12 February 2021, 15:08 #160
You guys convinced me to grab a 10” mlok, can’t wait haha
FFL 07/ NFA 02
TWN Certified Hydro Dipper
-
13 February 2021, 19:44 #161
Save that all for another thread...
Just to go off 11b’s comment about the blacked out logos..
I agree, much better blacked out... But then they don’t black out the mlok/magpul writing on the bottom..... and to point out..I do not like the anti rotate setup on these 762 mlok rails.. Piece of plastic that clips in to the rail and then goes over the upper..well didn’t fit without a bunch of trial and error grinding of the little piece.
Other then that a solid railLast edited by mustangfreek; 14 February 2021 at 13:05.
-
20 February 2021, 18:51 #162
-
21 February 2021, 23:20 #163
Nice Fde 308 stick!
Question.. I have a newer 762 mlok rail and my anti rotation piece is different then yours? That have the pin in it?
Edit: for a crappy pic to show what I’m saying... pic on centurions site is different then what I got. They show it integrated into the upper and then the plastic piece?
Mine has more to it and goes around the upper side I’m assuming..just seems kinda ehh..the plastic piece and all.. And FYI , it don’t fit a aero m5 upper without some tedious filing of the plastic piece
https://centurionarms.com/7-62-mlok-rail-11-5in-15in/
-
21 February 2021, 23:56 #164
Then looks like this installed (yes the rail is on all the way, just a gap from the different tolerances I guess )
-
22 February 2021, 05:02 #165
I gotta think something is not right with that gap.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode