Quote Originally Posted by Former11B View Post
Older post but I just read you’re running Wolf gold

I have seen evidence that Wolf gold causes some abnormally high baffle erosion due to flame cutting or whatever else is in that mixture (and its undergassed compared to say LC M193 but that’s not the issue).

This was a Surefire RC2 can with 3500 rounds fired of ONLY Wolf gold and a the erosion pattern looked to be about halfway through the blast baffle (10.3” barrel). He was using a 4 prong FH rather than a brake which would probably aid in saving the blast baffle

Just a friendly word of caution to keep an eye on yours just in case
I’ve heard that also. Not worried as I don’t have a lot of it.

Did you mean to post a pic?
Ya, Those 3/4 prong fh’s are notoriously worse on a can.


I was using a bootleg in a 10.5 that was over gassed. IT helped a lot , all around way better. Less gas, less dirty and easy to change settings

Now running a brt suppressed tube and std bootleg bcg ,a step better and now gonna try a A5 setup and lantac and hoping just a little better with the Ebcg