Daniel Defense OMEGA Rail install guide and pictorial review

[Stickman]

With the above out of the way, let’s make sure that we are starting with an empty weapon. Once that is done, remove the upper receiver, pull out the charging handle and bolt carrier group (verify the chamber is empty a second time), and lastly, pull off the handguards. While the handguards are the only thing that actually needs to be pulled off the weapon, by pulling the BCG you are ensuring that no accidents can occur.

You should now be looking at something similar to the below picture.






Take your box with the DD Omega rail. You should find a two rails, with the larger upper rail having 4 allenhead screws already inserted. In addition, you should have 4 slotted flathead screws with nylon washers, an allen wrench and rail covers. If it helps, line everything up as shown in the picture.