Daniel Defense OMEGA Rail install guide and pictorial review

[Stickman]

Now we move onto dropping in the lower rail. It goes in the same way as the upper rail. Pull back on the Delta ring, and push the groove over the barrel nut teeth. Once its in place, release pressure from the Delta ring, and both pieces of the rail will stay in position.





With both rails in place, you are no doubt noticing that there are two holes on each side that have a threaded helicoil inserted in them. The four slotted screws will go into those locations. The screws come with a nylon beveled washer, and you should leave that in place when you thread the screws into place.