Results 1 to 5 of 5
Thread: Need help to build an AR-10!
-
30 January 2011, 18:02 #1Member
- Join Date
- May 2010
- Posts
- 14
- Downloads
- 0
- Uploads
- 0
Need help to build an AR-10!
My plan is to build it with these core parts:
http://www.rainierarms.com/?page=sho...roduct_id=1727
http://www.rainierarms.com/?page=sho...roduct_id=1911
http://www.rainierarms.com/?page=sho...roduct_id=1512
http://www.rainierarms.com/?page=sho...roduct_id=1762
http://www.rainierarms.com/?page=sho...roduct_id=1838
These are the parts that I'm in need of assistance on:
http://www.rainierarms.com/?page=sho...product_id=365
http://www.rainierarms.com/?page=sho...product_id=641
Are those 2^^^ compatible? That is my main concern.
Thanks in advance!
-Wrecks-
-
30 January 2011, 18:59 #2
If you are getting the Magpul PRS Stock, you don't need to get the whole A2 stock kit. YOu just need the extension tube, screw, buffer, and spring. Contact Lohn Hwang and he'll set you up with what you need. Personally, if I was going the .308 route, I'd get the LMT .308 Rifle.
-
30 January 2011, 19:13 #3Member
- Join Date
- May 2010
- Posts
- 14
- Downloads
- 0
- Uploads
- 0
Why is that? I just figured that Armalite was the proven system and Noveske is top notch. How could I go wrong? I'm here to learn though so by all means, enlighten me.
-
30 January 2011, 19:38 #4
The LMT has a quick change barrel and monolithic upper. They are very accurate and reliable. The LMT uses the Pmags. I like the LMT stock better than the PRS. Also has Ambi controls. For me, it wouldn't be a tough decision.
-
30 January 2011, 19:52 #5Member
- Join Date
- May 2010
- Posts
- 14
- Downloads
- 0
- Uploads
- 0
Well I guess I have something to consider before taking the plunge. Thanks for the info!