Results 1 to 11 of 11
Thread: Comparison of the Remington 6.8 SAAMI (SPC) and SPCII Chamber Comparisons Using the LMT 6.8 SPC 16"
-
13 March 2011, 15:00 #1
Comparison of the Remington 6.8 SAAMI (SPC) and SPCII Chamber Comparisons Using the LMT 6.8 SPC 16"
Comparison of the Remington 6.8 SAAMI (SPC) and SPCII Chamber Comparisons Using the LMT 6.8 SPC 16" is up. Please post comments here.
-
18 March 2011, 09:30 #2Member
- Join Date
- Mar 2011
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
Awesome write-up! Which chamber spec do you prefer? I have no experience with 6.8, so I'm just curious.
-
18 March 2011, 10:23 #3
The 1:11" Twist with the SPCII Chamber. I'd prefer it have the Polygonal Rifling, Ratchet Rifling, 5R, or 4-Grooves. The 6-Groove is Ok, but not the best. The SAAMJ Chamber is not ideal for the 6.8.
-
18 March 2011, 10:46 #4Contributing Member
- Join Date
- Feb 2010
- Posts
- 449
- Downloads
- 0
- Uploads
- 0
Paulo what about Noveske's chamber, he lists it as a Mod 1 chamber with 0.100" freebore - is this more freebore than a SAAMI spec chamber, and can his barrels shoot the SSA Tactical loads?
-
18 March 2011, 11:23 #5Member
- Join Date
- Mar 2011
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
Thanks for the info, Paul. Are there any manufacturers in particular that offer what you recommended?
-
18 March 2011, 12:13 #6
-
18 March 2011, 14:02 #7
Check out the Chart below:
http://spreadsheets.google.com/pub?k...yg&output=html
-
18 March 2011, 20:13 #8Member
- Join Date
- Mar 2011
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
Of course, there is a chart for everything! Thanks.
-
18 March 2011, 21:17 #9Contributing Member
- Join Date
- Feb 2010
- Posts
- 449
- Downloads
- 0
- Uploads
- 0
Cool, good to know.
I was toying around with the idea of a 6.8 SBR a while ago but it never materialized.
In your opinion, what would be the ideal barrel length if you wanted to build a shorty?
-
19 March 2011, 02:18 #10
-
20 March 2011, 08:15 #11
Good info Paulo