Results 1 to 15 of 23
-
5 June 2011, 11:58 #1Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
Burning Question about Bolt Carrier Assembly
I have a burning question about the working of bolt carrier group. I would be much appreciate if you could explain it in detail (hopefully with picture)...
How does a bolt carrier lug lock a cartridge in place just before the firing pin ignite the cartridge?
Here are my observations.
1. The teeth on the lug suggests there is a rotating motion during the locking/releasing of a cartridge.
2. The rotating motion must not be guided by inward screw pattern because it could not withstand the extreme pressure for a long period of time, my guess is some form of simple mechanical non-linear rail that guide the rotating motion of the lug.
3. The weight of the BCG is critical for the success of stripping a cartridge from a magazine, and extracting a cartridge after firing.
-
5 June 2011, 13:11 #2
The cam pin and the channel it rides in cause the rotating motionLast edited by Uglyduck; 5 June 2011 at 13:16.
-Mitch-
-
5 June 2011, 13:15 #3Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
How does the carrier lug lock the cartridge in place? The animation explains the cause of the rotation, but it does not explain how the lug secure the cartridge so that the lug could extract the cartridge after firing.
-
5 June 2011, 13:20 #4
The extractor claw grabs the case. Disassemble your bolt and you'll see how the extractor works.
-Mitch-
-
5 June 2011, 14:31 #5Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
-
5 June 2011, 14:50 #6Distinguished Member
- Join Date
- Aug 2007
- Posts
- 1,584
- Downloads
- 11
- Uploads
- 4
-
5 June 2011, 14:58 #7Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
This animation explains a lot about the internal working of BCG. I definitely learn a lot from this video.
My Final question, how does an extractor grips a cartridge firmly for extraction? How does the rotation motion locks the cartridge in place? Any diagram/animation to show an extractor in action, would be very nice.
Thanks!
-
5 June 2011, 15:22 #8Distinguished Member
- Join Date
- Aug 2007
- Posts
- 1,584
- Downloads
- 11
- Uploads
- 4
Did you watch the entire video? Take a look again starting at 11:17 minutes.
-
5 June 2011, 15:52 #9Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
-
5 June 2011, 16:01 #10
The purpose of a bolts lugs is to lock it in to the receiver extension or the force of a round firing would blow the bolt away from the barrel.
The bolt is like a plug at the end of a tube and when an explosion happens in that tube the energy exerted travels the path of least resistance...out the open end. If the bolt didn't lock, the round would just explode in the chamber and release energy out the chamber into the upper and down the barrel, wreaking havoc along the way.
The extractor grips the bottom of a cartridge and the ejector drives the spent case off the face of the bolt and out the ejection port.
You really need to watch that entire video, it does a good job of explaining the firing sequence.Last edited by Uglyduck; 5 June 2011 at 16:29.
-Mitch-
-
5 June 2011, 16:20 #11
Quib,
I watched that video after my 2nd post and thought to myself "Quib must've directed this", ironic that you put it up. Its good material for a beginning enthusiast.-Mitch-
-
5 June 2011, 16:25 #12Distinguished Member
- Join Date
- Aug 2007
- Posts
- 1,584
- Downloads
- 11
- Uploads
- 4
-
5 June 2011, 16:33 #13Distinguished Member
- Join Date
- Aug 2007
- Posts
- 1,584
- Downloads
- 11
- Uploads
- 4
Think of the extractor as fingers, that pull the spent cartridge from the chamber, nothing more.
The bolt rotates, and its lugs interlock with those of the barrel extension. The interlocking of the lugs is what keeps the bolt locked in place during the firing cycle as the gas travels its path through the gas system.
"For every action there is an equal and opposite reaction." If the bolt did not interlock with the barrel extension, the force of the round igniting would blow the bolt backwards as the round propelled forward.
-
5 June 2011, 16:36 #14Member
- Join Date
- Mar 2011
- Posts
- 49
- Downloads
- 0
- Uploads
- 0
What is barrel extension?
-
5 June 2011, 16:45 #15
Its what most people think of as the chamber. It threads onto the upper receiver end of a barrel (before the barrel is mated to the upper) and contains the feed ramps and locking lugs that the bolt locks into.
This Link shows how a barrel is made and will give you an idea of what one looks like before the extension is mounted.Last edited by Uglyduck; 5 June 2011 at 16:51.
-Mitch-