Results 31 to 45 of 75
Thread: 11.5" Carbine Barrels
-
16 April 2014, 14:37 #31
-
23 August 2014, 17:23 #32Contributing Member
- Join Date
- Jul 2009
- Posts
- 260
- Downloads
- 0
- Uploads
- 0
I currently have an 11.5" BCM "pencil" barrel on my Colt's 733 clone. Full profile Colt's bolt carrier group and a Spike's ST-2 buffer. Standard carbine spring. It runs great with Tula, Federal XM193 and XM855, and IMI M193.
I am in the process of building two more SBRs. One with a 10.5" FN barrel, and another with a Daniel Defense "pencil" barrel cut down from 16" to 10". I'll try to update with how they each work. I'm thinking the 10" might have to have the gas port opened up. (XM177 clone)-lamarbrog
I sold my Browning High Power because it is a heavy, low-capacity, hammer-biting, magazine disconnecting, stiff manual safetied artifact with uncommon magazines, and it still holds the honored place of being my least favorite pistol I have ever owned.
-
24 August 2014, 10:49 #33
Glad this thread popped up again. I went ahead and ordered a 11.5" BCM upper (afterall, who can say no to a free BCM BCG). After messing around with half dozen 10.5" uppers I thought I'd shoot a 11.5" and see how it ran. I was originally going to just buy a Colt 6933, but this was the cheaper option for now.
I plan to keep the FSB, and use a Centurion Arms C4 7.0.
-
24 August 2014, 17:09 #34LEO / MIL
- Join Date
- Jul 2013
- Posts
- 845
- Downloads
- 0
- Uploads
- 0
-
24 August 2014, 17:09 #35
Anybody have experience with the Sionics 11.5 ?
http://sionicsweaponsystems.com/stor...id_category=10
-
24 August 2014, 19:51 #36
-
25 August 2014, 17:51 #37
I don't have enough rounds down with my 16" but I purchased them at a time where they were a steal at $159, so I bought 2. So far the barrel has been accurate. I haven't used their 11.5" but a future purchase maybe in order. I have been pleased with all of my SIONICS gear so far.
-
27 August 2014, 04:10 #38Contributing Member
- Join Date
- Dec 2009
- Location
- NC
- Posts
- 129
- Downloads
- 3
- Uploads
- 0
i bought one. for the price it was hard to turn down. nice craftsmanship, and more accurate than me. i only have about 2k down range, but runs great.
"Americans are so enamored of equality, they would rather be equal in slavery than unequal in freedom."- Alexis de Tocqueville
-
27 August 2014, 05:05 #39
I'm interested in keeping tabs on Scionics. Some of the people they have on-board are people I respect a great deal, and others...
The contradiction confounds me.WWW.TACTICALYELLOWVISOR.NET
-
31 August 2014, 14:42 #40
-
1 September 2014, 08:03 #41
-
1 September 2014, 13:31 #42
-
1 September 2014, 13:39 #43
-
1 September 2014, 14:53 #44
-
2 September 2014, 09:36 #45