Results 46 to 60 of 75
Thread: 11.5" Carbine Barrels
-
2 September 2014, 13:00 #46
-
3 September 2014, 17:14 #47
-
4 September 2014, 09:23 #48
-
4 September 2014, 16:11 #49
-
4 September 2014, 16:49 #50
When you go can you take a pistol lower with you as well and let me know how that works :)
Just a regular guy.
-
4 September 2014, 17:28 #51
-
4 September 2014, 18:13 #52
-
4 September 2014, 18:34 #53
-
5 September 2014, 01:59 #54
Wanting to try the barrel out of one of these in my new build.
http://www.bravocompanyusa.com/BCM-1...elwf-kmr10.htm
-
5 September 2014, 20:20 #55Contributing Member
- Join Date
- Oct 2012
- Posts
- 396
- Downloads
- 0
- Uploads
- 0
I really really wish I could venture into a SBR upper.
-
6 September 2014, 11:55 #56
-
8 September 2014, 05:11 #57
I was really close to buying one of those, then the 14.5"/13.0, then the 16"/15.0 (which isn't out yet, I don't think)... then I realized I had a Colt 6933 upper sitting around pretty much stock and pretty much unfired, and the lower it came on, and kind of wound up building a similar upper around that. obviously the barrel on mine is just a standard 0.625" OD, 11.5" barrel, but I got the 10.0, the BCM comp, the BCM keymod VFG, BCM's new flip sights... now I just need to go brave the public range on public day and get it zeroed.
If all goes well, I may also skip the 16" version and turn my 6520 flattop Colt into a matching example. Would be funny to come 'round after all this time to having two matched guns again, one 11.5" and one 16", but with all the "new hotness".WWW.TACTICALYELLOWVISOR.NET
-
10 September 2014, 14:45 #58LEO / MIL
- Join Date
- Jul 2010
- Location
- Arizona
- Posts
- 82
- Downloads
- 0
- Uploads
- 0
We have several law enforcement agencies and civilians using the Melonite barrels. The accuracy has been outstanding as well. An LE agency in GA shot a 1 MOA group with our 11.5" with a Leupold scope and their duty round. Across the board our chrome lined and Melonite barrels shoot very good. They are all 4150CMV, proper gas ports sizes, correct 5.56 chambers, etc...
-
10 September 2014, 19:12 #59
I'm a big fan of SIONICS products. My next SBR upper will be built around a 11.5" Barrel. Gunz, I need the industry price.
Anyhow, GOST, I didn't have much range time to dedicate to shoot the 11.5" BCM. Only got 210 rounds down range on Monday with it. I was mainly shooting the 10.3" DD Barrel. Anyhow, the 11.5" is a smooth shooter, but hard to say if it's any smoother than a 10.3-10.5" The BCM upper did remind me of the fact there is nothing wrong with using a $5 A2 FH.
-
10 September 2014, 19:39 #60
Wish sionics made a 10.5". Not sure I want a 11.5" on the pistol build.