Results 1 to 15 of 122
-
17 November 2014, 15:21 #1
-
17 November 2014, 16:43 #2
So no lever or mechanism to disengage the latch? Just pull and release? I like the look of it.
-
17 November 2014, 16:48 #3
I'm interested
-
17 November 2014, 17:04 #4
-
17 November 2014, 17:14 #5
Not sure how I feel about these charging handles with less parts. I've got one of the first Raptors without the lasered logos and it's been my favorite.
-
17 November 2014, 17:40 #6
GOST, did you catch a price on this? I tried the Raptor, and it wasn't at all for me. This "lever-less" CH looks pretty interesting though. I wish someone would do a review on one so I don't have to be my own test dummy. I removed a thin layer of skin on my right hand with the Raptor, and promptly gave it to someone else needing one to finish a rifle for a friend. Since then, I'm still not crazy about the idea of an ambi CH, after jamming my fingers under the CH and F/A, but this one looks doable and could double as an "ambi" with the lack of a lever being needed.
FTNRA Life Member
Basket full of Deplorables Life Member
-
17 November 2014, 17:50 #7
-
17 November 2014, 18:07 #8
FT they didn't have a price listed yet, maybe it will be released tomorrow. Maybe we will get lucky there will be a MrGunsNgear review.
-
17 November 2014, 18:11 #9
-
17 November 2014, 18:21 #10
Same here, but I prefer the Mod 3. Also own one PRI Gas Buster. But I liked the idea of the MEGA arms not using a lever at all. However, GOST brought up the point that the Ambi's work well on certain upper receivers with a shorter FA. I'm certainly not going to change out receivers to try one, nor did I think GOST was suggesting that, but I don't want to lay out another $80 or so for a CH, just to give it away a day or two later.
Maybe, as GOST suggested, someone will do a review on this soon, and that issue (clearance) will be addressed.NRA Life Member
Basket full of Deplorables Life Member
-
17 November 2014, 18:44 #11
I am curious how it releases then, when you cycle the rifle. Without a lever it seems like it will put excessive wear on the upper that the CH catches on...
-
17 November 2014, 18:59 #12
Depending on price I think I'll try it on this build. I was a planning on just going with another BCM Mod 3. Even though it is pinchy.
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
17 November 2014, 19:56 #13
Here's the similar from SLR.
http://slrrifleworks.com/index.php?r...product_id=359
-
17 November 2014, 20:10 #14
-
18 November 2014, 05:48 #15