LANTAC USA SPADA-S Rail

Lantac USA is pleased to announce the SPADA-S Handguard. The handguard features anti-rotational features on the barrel nut itself, so none of the handguard comes over the upper receiver. This prevents any incompatibility issues, commonly seen with Billet Uppers. In the photos below the 12.5" SPADA-S Handguard is featured along with the upcoming Lantac Billet Upper Advanced Receiver or UAR. Check in with Lantac USA for their current offerings and upcoming products.


SPADA-S Handguard Features:

Patent Pending attachment system.

1.Will mount to any receiver as none of the handguard comes back over the upper.
2.Anti Slip Tab that engages with the barrel nut so that the handguard cannot slide forward without both clamping screws being removed fully.
3. Barrel Nut install does NOT require timing or adjusting to line up. Can be installed quickly and simply and torques to the correct setting without re adjustment to get correct alignment.
4. Powerful clamping of Handguard onto Barrel Nut with Anti Rotation Insert that is captured between the upper and the rail without any fixings.
5. Built in anti twist QD sling Swivel point on both sides.
6. Stainless Helicoil Inserts in key attachment positions.
7. RAIL EXTENSION SYSTEM R.E.S, allows users to extend the top rail via bolt in sections at different heights and lengths. More on that later.
8. 1.5'' Outside Diameter, making this one of the lowest profile handguards available.







http://www.lantac-usa.com/