Results 1 to 15 of 129
Thread: Reloading Components
-
6 February 2015, 20:13 #1
Reloading Components
I really couldn't find a thread for something like this, so here it is I guess, lol. Someday I'll get a macro lens
-
6 February 2015, 20:15 #2
Nice Ordnance!! Looks good considering no Macro lol.. I like it might have to contribute to help this thread!!
-
6 February 2015, 20:15 #3
-
16 March 2015, 17:59 #4
This looks like a good place for this. Also I started a FB page for the fun of it. Same as my name here. Check it out.
-
16 March 2015, 18:02 #5
Very nice! I might have something to add to this :)
-
16 March 2015, 18:05 #6
-
16 March 2015, 21:00 #7
Some .223 boolits. From left to right: Hornady 52gr BTHP, Nosler 52gr CC, 55gr Xtreme FMJ, 69gr SMK, 69gr Nosler CC, 75gr Widener OTM, 77gr Nosler CC
Nothing like opening a fresh box
Rolling some
Getting some extra supplies laid in:
-
16 March 2015, 21:17 #8
^^ I hate you lol... much supplies! So money I don't have!
-
16 March 2015, 21:50 #9
Yeah....that's just some of my .223 stuff. Not counting all of it or .308 supplies or my pistol stuff lol
-
16 March 2015, 21:53 #10
Showoff! I do have 1K of 147gr bullets ill post tomorrow to help this thread! I nver have more than a lb or 2 of the same powder. Too many choices lol
-
18 March 2015, 07:36 #11Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
18 March 2015, 07:37 #12
Soft Points by Pyzik, on FlickrGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
18 March 2015, 09:09 #13
-
18 March 2015, 18:21 #14
-
18 March 2015, 21:17 #15