Results 1 to 15 of 50
Hybrid View
-
20 October 2015, 12:38 #1
I didn't put any stuff on my muzzle brake. What is the consensus about doing so?
-
20 October 2015, 13:06 #2
I highly recommend it on a suppressor mount of any kind.
If you shoot a lot through your can and don't have time to take it off before the can cools, it may lock up to the taper mount and when you go to unscrew it, there's a good chance you'll unscrew the mount from the barrel with it stuck in the can...I've had that happen before. Basically, I just tightened it back on as hard as I could and dumped a couple mags through it. After I could touch it, but while it was still hot (using nomex gloves), I was able to remove the can. I then loctite'd the muzzle device on. This can also prevent a slow loosening/backing off of the mount over time.
Experience has also taught me to apply a small dab of anti-sieze or Frog Lube on the taper mount (not threads) for ease of removal after shooting