Results 91 to 105 of 129
Thread: Reloading Components
-
16 January 2018, 03:54 #91
-
16 January 2018, 11:24 #92
-
25 January 2018, 13:28 #93
Any guesses on the type of powder?
And yes I love small primer .45 brass
-
25 January 2018, 13:44 #94
-
25 January 2018, 15:42 #95
-
25 January 2018, 17:56 #96
-
25 January 2018, 18:43 #97
Kinda looks like 800X
Sent from my iPhone using Tapatalk
-
25 January 2018, 18:49 #98
Titewad. Shotgun powder
-
26 January 2018, 21:13 #99
-
30 January 2018, 15:47 #100
Last of my 77gr noslers...
LC brass
CCI 450 - mag primer-
23.5 grains of TAC
77gr nosler/Smk seated @ 2.245
-
30 January 2018, 18:15 #101
-
3 February 2018, 01:51 #102
What’s your recipe
-
3 February 2018, 06:31 #103
I recently tried out the Nosler 77 gr CC (picked up some blems on SPS) and was pleasantly surprised. Behind 24 grains of Varget they seem to do better than SMKs in my 18" WOA SPR barrel. I need to a few more trips to the range to verify the load, still, and I've got some TAC I might play with.
-
4 February 2018, 05:03 #104
-
13 February 2018, 13:55 #105
Same here, although I haven’t tested slot the buskers shoot better for me on paper so far.
Former11- seems like the re15 is a popular choice, I only have tried some under varget and TAC , my 69gr smk’s shoot lights out under varget but not as good in the 77’s as I’ve gotten with tac so far
My 77gr nosler load - 23.5 -TAC - LC case- 2.245 - and CCI 450 mag primer
Did try a 100ct box of federals small rifle match but actually groups opened up, so stayed with the 450 which I use for all small rifle loads