Results 136 to 150 of 171
-
23 June 2015, 23:07 #136Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
I feel that the slight group size increase can be attributed at least in part, if not all, by coming off the gun for each shot to fiddle with the mount. Point being, the variance appears to be much less than the size of the 2moa dot, accounting for ammunition performance alone. I'm very pleased with my purchase.
-
24 June 2015, 12:54 #137SCALARWORKS - SHOOTER DRIVEN.
----------------------------------------------------------------------
https://scalarworks.com 1-844-556-1913
-
27 June 2015, 06:00 #138Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
Ah, my first constructive criticism...the mounting wheel is on the left of the mount. This means that when running the optic forward on the upper, the thumb is tasked with avoiding the cam-pin cutout moulding to tighten the mount. The wheel is very unobtrusive. Couldn't it have been placed on the RIGHT side of the mount?
Other than that, absolutely loving it!
-
27 June 2015, 07:04 #139
-
27 June 2015, 08:21 #140
Glad it's working out for you.
The decision to place the thumbscrew on the left side has more to do with LDMs that we haven't yet released than the one we have: The cam pin housing is not nearly as obtrusive as the shell deflector on the opposite side.
The LDM/Micro is 100% reversible.SCALARWORKS - SHOOTER DRIVEN.
----------------------------------------------------------------------
https://scalarworks.com 1-844-556-1913
-
28 June 2015, 02:07 #141Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
9 December 2015, 08:26 #142
Scalarworks, when are we going to see some more Aimpoint Mounts, I've got a T2 coming with no mount.
-
9 December 2015, 10:46 #143
NEW Scalarworks LDM/Aimpoint Micro Mount
Website (or was it their recent email?) says end of December. I'm waiting too. :)
-
10 December 2015, 17:20 #144
Any chance of these things in FDE and for RMR's? Thanks!
-
14 December 2015, 01:02 #145
Standing by for the mounts to get back in stock.
I need one for a T2 I picked up!
:D
-
26 December 2015, 11:57 #146SCALARWORKS - SHOOTER DRIVEN.
----------------------------------------------------------------------
https://scalarworks.com 1-844-556-1913
-
26 December 2015, 12:01 #147SCALARWORKS - SHOOTER DRIVEN.
----------------------------------------------------------------------
https://scalarworks.com 1-844-556-1913
-
26 December 2015, 15:36 #148Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
26 December 2015, 17:34 #149Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
I hope you don't sell out by the first when I get paid...
-
4 January 2016, 08:06 #150SCALARWORKS - SHOOTER DRIVEN.
----------------------------------------------------------------------
https://scalarworks.com 1-844-556-1913