Results 1 to 15 of 72
Thread: Leupold MK6 on-going "review"
Threaded View
-
11 April 2017, 00:53 #20
Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 758
- Downloads
- 0
- Uploads
- 0
Do you mean the T1 was faster than the MK6 on 1x, or faster than trying to engage at 2-6x or adjust down to 1x before engaging?
Same boat I'm in. The NF has been out for roughly 2 years, if you're the right guy...which as cool as I pretend to be with my Hodge MOD 2 and closed tine warcomp and tons of M855A1 all that jazz, I am not.
Why I am keeping the mK6:
-17oz
-EXTREMELY tough
-Optical quality is good, and I note no CA
-1X is as close to 1x as I have seen except the K16i, which also had less pincushion distortion, but the "non homogeneous" reticle of the K16i was slower for me. I like ONE DOT. I also hate Eotechs.
-The turrets are awesome. Very low profile, zerostop, ballistic dials are cheap and readily available for any load you give Leupold the specs for.
-The reticle can be used to hold, dial and hold, or whatever.
-On 1x without a battery, it's still usable, if not ideal.
-Total footprint with Aadland caps is very small for the functionality you are getting.
-It was a gift from a good friend, and I never sell gifts of that magnitude, even without all of the other above points. As far as I am concerned, this MK6 is an NFA item, regarding my ownership trend of it.
What would make it better?
-Firedot illumination
-H27D reticle
-24mm objective
-integrated throw-lever like 1-8 Trijicon or VCOG or K16i. I am NOT a fan of the MK8 solution.





Reply With Quote