Quote Originally Posted by mustangfreek View Post
Why?



Lol.What gas issues? Btw 2 of these I’m talking about are RA barrels.

I was just mentioning the things I’ve played with. Std shit nowadays has huge gas ports and add a can and ..overpassed is the norm for about all ARs unfortunately

Phuck that, I went down this road, why not fine tune it to MY setup

You run adj gas blocks and gimmicky charging handles, so not sure what iyour over complicating comment is about.

I don’t know why some more companies just can’t drill a small hole, instead of a Grand Canyon.. 556 with a can will run with a .045-.050 ish port no problem.. why the yugggge fogging holes......
I have two Griffin “SNACH” charging handles

The first one I got because it was new and the guy who sold me the can had one and sent it to me. Literally did nothing gas related on my rifle because no gas was coming out of it.

I bought a second one because I liked the handles, how solid it was, etc not because of the gas relief feature because they don’t have gas coming out of them. All the other charging handles I’ve bought since have been Geissele ACHs.

All I said was “it’s easy to overcomplicate it”. I see tons of people replacing tons of parts and they get so far away from “zero” they don’t know what’s causing their issues.

And if you ran a .045-.050 gas port, all these people running Wolf and Tula would cursing the barrel or rifle online. The underpowered rounds wouldn’t work with it, especially unsuppressed

The AGBs are tuned to where they function on all rifles at the same point: where they function unsuppressed with the same ammo so they’re all running the same rate of gas return unsuppressed. They do bleed off gas when suppressed but that’s the point. I could run the AGBs much more open but then the rifles wouldn’t function unsuppressed and it would be like mimicking the tiny gas port.