Results 16 to 30 of 45
Thread: NEW BCM Handstops
-
12 November 2014, 17:08 #16LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
your probably thinking of the hand stop made by Fortis
-
12 November 2014, 17:10 #17LEO / MIL
- Join Date
- Jul 2013
- Posts
- 845
- Downloads
- 0
- Uploads
- 0
Looks like a copy of the Zero Bravo handstop....
-
12 November 2014, 17:22 #18Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 November 2014, 17:26 #19
-
12 November 2014, 18:26 #20
-
12 November 2014, 18:31 #21
I'm picking one up as well along with their new stock. Figured I'd give it a shot. I was leaning to the fortis short grip for my SBR mainly for the looks but figured I'd try this for now. Still might pick up the fortis down the road. I think the KAG plus some railscales will go well together for a lopro package.
"Always do more than is required of you"
- General George S. Patton
-
12 November 2014, 19:29 #22
-
19 November 2014, 03:31 #23
Ok so first impressions of the KAG are ok. I haven't shot with it yet but it feels good. I had it on the rail while I was building the gun. So I left it on. No need to take it off. I get everything put together and it's too far forward so I go to loosen it off and nothing doing. Upon inspection I noticed the keymod nut and gas block where pushing on each other . So it was stuck. I had to take the rail off to get off the KAG. So note to you guys don't put it under your gas block haha. The rail is an NSR rail btw.
"Always do more than is required of you"
- General George S. Patton
-
19 November 2014, 05:12 #24
I got the pic rail and Keymod version last night. I have to admit I wasn't that interested in the KAG until I tried it. It's a preference thing I suppose, but I was impressed by both the feel and the mounting of it.
The new hardware in the KAG is totally idiot proof. On some keymod attach items, you can manage to get the nuts turned the wrong way. But this mounting hardware is ambi, and there's no nuts to spin out of alignment.
-
19 November 2014, 05:26 #25
-
19 November 2014, 05:30 #26
Ditto on the excellent mounting hardware. I like the feel of the Unity better, but this is fine on a pistol.
-
19 November 2014, 06:06 #27
I have a KAG and KMR rail, just waiting on my VooDoo melonite barrel to show up to finish the rifle. The KAG is very light, appears to be very well made. I won't know about the ergonomics until the rifle is finished, but both the KMR and KAG appear to be quality components.
-
19 November 2014, 06:21 #28
-
19 November 2014, 06:38 #29
-
19 November 2014, 07:18 #30