Results 46 to 60 of 82
Thread: Wanted: Actual OAL of Handguards
-
16 November 2014, 19:47 #46
-
16 November 2014, 19:52 #47
Oh alamo... let the guys who actually own the stuff think outloud for a minute.
I own several MCSR's and you can have the can partially covered and still manipulate the levers, depending of course on how much is covered.
I don't have a 7" Ord, but you're right anything longer would be too long. I think I have a 9 and a 10.
-
16 November 2014, 19:58 #48
I just went down and tried to see if I could manipulate it on and off with just the release area using my finger tips and pretending like I had grip muscles stronger than a 3rd grader... I can do it. I also measure the diameter with the release button again and I was wrong it's 1.6325", so I can look at 8" options as long as it's ≤8" and has an ID >1.65"
-
16 November 2014, 20:09 #49
Ok,
So I measured some other 7" Rails:
Centurion Arms C4 7.0 = 7.25"
Fortis REV 7 = 7.25"
Aero Precision M4E1 7 = 7.25"
-
17 November 2014, 03:59 #50
-
17 November 2014, 09:45 #51
I'm no stats expert...
I would imagine all 7" Rails are basically 7.25" or less to fit behind a FSB.
The only 8" Rail I can think of is the URX 3.1, but the ID would be too small for the suppressor. Looks like on this one, 7.25" is the longest you'll find that I can think of.
-
17 November 2014, 09:54 #52
I'm laughing right now because someone has the Fortis REV as 7.3" in their system and when I asked them to measure it they said they did, lol. SLR does an 8" but it's ID is 1.3" also. I think I'm going to either have to settle on being the Guinea Pig for a Phase 5 Slope Nose or cut down something else and give me an excuse to pull out some spray cans lol...
-
17 November 2014, 10:50 #53
I'd cut down a FORCE rail, because it's cheaper than some of the other options.
-
17 November 2014, 11:25 #54
-
17 November 2014, 11:48 #55
-
24 November 2014, 02:45 #56
-
24 November 2014, 14:59 #57
-
24 November 2014, 16:48 #58Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
MI SSK 10 is actually 10.5"
Sent from my iPhone using Tapatalk
-
24 November 2014, 19:58 #59
-
24 November 2014, 20:16 #60