Results 391 to 405 of 1202
Thread: New Sponsor: Arisaka Defense
-
27 February 2015, 14:06 #391
Leveler, revision 2. We had a lot of problems with the orange color, so these are clear anodized. The slot on the base is offset to help with some one-piece scope mounts that ramp upwards. Voodoo_man had a good example of this specific issue, which the new bases should help with. The larger wedge allows leveling with extra high rings.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
27 February 2015, 14:20 #392
-
27 February 2015, 15:11 #393Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
27 February 2015, 18:51 #394
Still looking at around 3/02 for the levels? I need to pick one up.
-
27 February 2015, 20:31 #395
They're scheduled to arrive on 3/2 but with all the bad weather I'm thinking more like 3/4, which is represented on the Arisaka site. Pre-orders are open, though. I haven't added the large wedges or the combo set that includes both small and large wedges to the site, yet.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
27 February 2015, 20:57 #396
I pre-ordered one. It should work out. Everything is mounted up but I haven't sighted my newest scope in yet. We were adding curshed asphault to ease on the mud whn it gets damp. Now we have too much snow my range is closed. B
-
28 February 2015, 17:43 #397
-
28 February 2015, 17:43 #398
-
28 February 2015, 23:27 #399
-
3 March 2015, 19:19 #400
So this may or may not be the place for this question but I didnt really think it warrented its own thread, but if it is deemed that it should please feel free to move it. I was wondering if the slots on an NSR at the 11 and 1 o clock positions would technically accept M-Lok type accessories and mounting hardware. I also appologize if this comes off as a "noob" question but its something I have always wondered about and I have never had any M-lok stuff around to try it out.
"Always do more than is required of you"
- General George S. Patton
-
3 March 2015, 20:11 #401
Unfortunately they don't. They're slightly too slim for the M-Lok nuts to fit through. Too bad...otherwise you could throw an inline mount on there. This is one of the main reasons we decided to manufacture the offset scout mounts, which put the light in exactly the same spot, and are as low profile as possible on the NSR:
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
3 March 2015, 20:53 #402
-
6 March 2015, 18:48 #403
Got my new Arisaka scope leveler today! Man I've been missing out. Best money I've ever spent. Had the scope leveled in seconds. Absolutely love it!
Few pics and I played around with the second for fun.
-
6 March 2015, 20:35 #404
Glad you like it! :)
600 series scout bodies are back from anodizing, along with more 300 series. Should be trimmed and available next week.Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
6 March 2015, 21:41 #405