Quote Originally Posted by gatordev View Post
The Razor 1-10 eyebox is relatively unforgiving at 10x, but better than a NX8. At 8x, it's fine. I find the ATACR 1-8 to be slightly more forgiving. Both have their strengths.
Ah, I presumed the concern was the eyebox at 1X. You know, where it actually matters. If I'm taking shots at 10x (or even at 6x on the Gen II) I just expect I'll need to be in a good stable position.

I absolutely love my Razor Gen IIe 1-6x24 with JM-1. Zero at 200 yards and you get point blank red dot from 0-200 yards and effective holds from 300-600 yards. Yes, it's a bit heavy in a Bobro QD, but so much capability. The only thing really holding me back on the 1-10 is red dot performance at 1x with the reticle in the 1-10, which I don't think is as good as the near-RDS capability of the 1-6 (just from playing around with the gen III in the shop).

I'm still trying to decide if I can get over the ATACR's rotating ocular. At a minimum, it's annoying as hell, especially if you're trying to use flip up caps. At even with Mil pricing on the NF, it's really hard to justify the cost premium over the Razors.

Quote Originally Posted by gatordev View Post
(not so) Amusingly, I installed a second 1-10 the other day in your NF mount. Install went much quicker since I had another 1-10 to match position on the receiver. After I torqued everything down, I undid the receiver cross mount bolts to do something (I can't remember what) and got distracted for a minute and then picked up the rifle off the vise. Down went the scope onto the cement garage floor. Oof. Well, at least there's a warranty...
That is totally something I would do - I feel for you. Happy with the mount, I presume?